5-types-of-home-foundation-systems.jpg

5 Types of Home Foundation Systems

concrete Tempe is the structural base which determines the strength of any building, and there are different foundation systems that are used to cater to the structural demands of different climates and construction techniques.

Below are just five of the most commonly used structural foundation systems in building homes today.

Typical Stem Wall and Footing Formation

This method starts with digging the footings, which should be measured at 12 ft. wide, 18 inches deep to 35 ft. wide and 8 inches deep. The stem walls, on the other hand, will differ in size and dimension depending on a number of factors including the landscape and the flooring system that is being followed. Once the stem wall and footing have been installed, a slab is placed on top to strengthen the Tempe foundation repair.

Grade Beam and Drilled Shaft Concrete Piers

While commonly used in the construction of large-scale projects such as commercial buildings, this method can be very cost-effective for extensive residential construction projects as well. It’s also the go-to method for buildings that are constructed in highly malleable clay soil; where a supplementary structural analysis has to be done in order to complete a soil analysis and plan.

Even Slab with Slanted Edge

This particular type of foundation is commonly used in areas where the climate has little to no frost, and the foundation is usually made from monolithic pour, and placing post-tension cables is a good way to set the foundation firmly in place.

Permanent Wood Foundations

As far as foundations go, this is one of the most popular methods, but it’s mostly found in areas that are located in the northern regions. As the name implies, this type of foundation repair Tempe is constructed from wood, except that it can’t be any old type of wood. It has to be pressure treated wood, which is usually placed on top of the poured concrete base.

In order for this method to work, crawl spaces need to be constructed onto an established base of driven timber, while the accompanying stem walls are made with pressure treated wood for added strength.

Basement Foundation

You’re most likely to find this type of foundation in residential spaces, as well as high-traffic workspaces and storage facilities. They can be described as hollow sub-grade edifices, whose fundamental structural plan is mostly determined by functionality. This means that considerations of efficiency in repelling external earth pressure or hydrostatic pressure are simply not deliberated in the construction of this foundation.

Foundations like this come with basements that are constructed from cinder block, also known as CMU. Other times, concrete walls are constructed using the cast-in-place method. Whichever one you choose, it’s important to waterproof your basement foundation in order to avoid moisture infiltration issues that might threaten the integrity of your foundation repair Tempe.

As you can see, different structures and terrains require different types of foundations for long-lasting efficacy. Each is unique and constructed from different materials that enable it to provide an enduring base to the overall structure.

plook-violets-magical-nurseryp-5b6380677c7fa.jpg

Look: Violet’s Magical Nursery

While pregnant with her daughter Violet, Lauren Hufnagl desired to make the perfect nursery. Since she had been working with a small space on the floor of her house, she knew it would be difficult to make a nursery that made a balance between restful and serene and lively and stimulating — all without getting too busy. The solution was discovered in ease — Hufnagl stuck into a grown-up palette while accenting with unique accessories, and relying on a”less is more” mentality. “I love modern children’s layout,” she says. “But I was trying to keep a warm and cozy feeling.”

This chamber is located at the very top of Hufnagl’s house. The sloping lines of the roof prevented her from hanging wall art, so she made a mural instead. After painting the walls a gentle blue-gray, she brought the tree freehand, painted it with white latex paint, and also added gray fabric leaves with liquid cornstarch as the adhesive.

The dresser was a hand-me-down from among her family members. Originally this bit was all oak. Hufnagl painted the outside white and replaced with the knobs with chic metal-and-white pulls. The metal owl on the top was a present from a co-worker and his wife.

Interior colour: Prelude by Behr
Sheets: White fitted crib sheets from Target
Crib skirt: Carousel Designs
Crib: Babies R Us

Although it’s now a soothing mix of foggy gray-blue and pops of orange and white, this space started out as something very distinct. Before tackling this space, the walls were painted a glowing red-orange and beige, with a newspaper sports-themed border. After promptly repainting the space and placing in new hardwood flooring, cut, and beadboard, Hufnagl, that writes the blog With Two Cats, sat down and came up with a fresh concept for your space.

Stuffed fox: Sleepy King
Stuffed owl: leJeune
Letter”V”: Anthropologie
Bumper: Custom made by Rockytop Design

Hufnagl had the window seat cushion and the bumper custom produced by a design firm on Etsy. Those ended up being her main splurges for your nursery. She made up for this with all other finds: The cushions on the window seat are her own creations, and she purchased the glider (in perfect condition) in a neighbor’s yard sale for $5!

Window seat cushion: Custom made by Rockytop Design
Floor lamp: IKEA
Curtains: Urban Outfitters

The biggest challenge for Hufnagl and her husband was operating with such a small area. A nursery includes a lot of necessities, but they did not wish to space to eventually become overcrowded and stifled. This tiny nook became the ideal place for additional storage, and a fantastic reason for Hufnagl to finally display her print from Made By Girl.

Visit Hufnagel’s website, With Two Cats

Next: More inspiring nursery designs and kids’ spaces

See related