How Much Material to Purchase to Generate a Duvet?

A duvet itself usually is filled with down or polyfill and bought without a cover. Typically made of sheet-replacing cotton for comfortable sleeping, duvet covers also allow for the design opportunity of introducing colour or print to some bedroom program. Making a duvet cover for a double bed starts with choosing suitable fabric and knowing how much fabric to buy.

Measure to Be Sure

A duvet should cover the faces of the mattress and also extend down past the top of the box spring by at least 1 inch. Measure from the top of the box spring, up to the surface of the mattress, across the top and down to the top of the box spring on the other side. Add 2 inches to this measurement for the finished ribbon width. Measure from the top of the box spring at the foot of the mattress , up to the top of the mattress and up to the head of the bed. Add 1 inch for this for the length of this duvet. Record these measurements as width by length. For instance, using a mattress 12 inches deep to a double bed that measures 39 inches wide and 75 inches long, the completed duvet measurements should be 65 inches wide and 88 inches long. Purchase the duvet. If you are using an already bought duvet, then measure it to the length and width.

Know Your Fabric

You will need two pieces of fabric that measure the completed duvet measurements plus seam allowances. After the case, you will need two pieces of fabric 66 inches wide and 89 inches long. A set sheet may provide a single piece of fabric big enough to cut this piece, but if you are using 45-inch-wide fashion fabric or 54-inch-wide drapery fabric, the fabric must be sewn together, making pieces wide enough to hold the inner cloth. Consider this when selecting the fabric, and think about the washability and comfort of this fabric, too. A duvet adds two layers of covering to a bed, together with the filler, and should you use thick or heavy fabric for the duvet, then it increases the warmth and weight of the bed coverings. If you’d like a washable duvet, then be sure that the fabric has some polyester content to help prevent wrinkles when laundering, but remember that polyester adds to the warmth of this cover more than normal fibers would.

How Much to Buy

Divide the essential cut width of this duvet from the width of the fabric you’ve selected and round up the figure. This is the range of pieces of fabric required for each of the top and undersides of the duvet. For instance, if the trimming width must be 66 inches wide along with your preferred fabric is 45 inches, then you need two pieces of fabric for the top of the quilt. The duration of every piece is equivalent to the cut length of this duvet. After the case, you need 178 inches of 45-inch-wide fabric5 or 5 yards for each of the top and underside.

Save Some Cash

You don’t need a seam running down the center of the duvet. Plan to get one long piece down the center, and cut the remaining piece in half lengthwise; sew these pieces to both sides of the center section. With careful preparation, you could have the ability to cut back the quantity of fabric you want. For instance, when using 54-inch fabric on a twin duvet, then you need to add 6 inches to each side of the center strip to produce the piece the needed 66 inches wide. It’s possible to cut four of these additions from one additional width, so rather than needing four widths of cloth to the top and underside, you need just three: two for the center pieces and one cut into four long strips to the side extensions, which saves nearly 2 1/2 yards of fabric.

See related